Save WiFi/Rules
Contents
Change of definition to Software Defined Radio
Citation: 80 FR 46914 Page 46914
Text:
Section 2.1(c) is amended by revising the definition of “Software defined radio” to read as follows:
§ 2.1 Terms and definitions.
Software defined radio. A radio that includes a transmitter in which the operating parameters of frequency range, modulation type or maximum output power (either radiated or conducted), or the circumstances under which the transmitter operates in accordance with Commission rules, can be altered by making a change in software without making any changes to hardware components that affect the radio frequency emissions.
Repeal of Separate Software Defined Radio Application for Authorization Requirement
Citation: 80 FR 46918
Text:
Remove § 2.944.
Change of rules for application for grant of certification
Paragraph Citation: 80 FR 46919 Page 46919
§ 2.1033 Application for grant of certification. Paragraph 4(i)
(4) A brief description of the circuit functions, a functional block diagram of the RF circuitry of the device along with a statement describing how the device operates including software or firmware used to control such functions. This statement should contain a description of the ground system and antenna, if any, used with the device.
(i) For devices including modular transmitters which are software defined radios and use software to control the radio or other parameters subject to the Commission's rules, the description must include details of the equipment's capabilities for software modification and upgradeability, including all frequency bands, power levels, modulation types, or other modes of operation for which the device is designed to operate, whether or not the device will be initially marketed with all modes enabled. The description must state which parties will be authorized to make software changes (e.g., the grantee, wireless service providers, other authorized parties) and the software controls that are provided to prevent unauthorized parties from enabling different modes of operation. Manufacturers must describe the methods used in the device to secure the software in their application for equipment authorization and must include a high level operational description or flow diagram of the software that controls the radio frequency operating parameters. The applicant must provide an attestation that only permissible modes of operation may be selected by a user.
Electronic labeling requirements
Paragraph Citation: 80 FR 46917 Page 46917 Section
§ 2.935 Electronic labeling of radiofrequency devices.
Section (d)
(d) The necessary label information must be programmed by the responsible party and must be secured in such a manner that third-parties cannot modify it.
