Group: Guix/Wishlist

Latest revision as of 08:23, 25 September 2024

The below list contains software that users of GNU Guix would like to see packaged. If you are interested in contributing to Guix, please consider packaging something in this list while keeping in mind that some may have been listed because they are "difficult" or elusive. If the package you're interested in is already listed, feel free to either add a "(+1)" next to its name or increment the vote count, e.g. "(+1)" -> "(+2)", etc.

So Before adding a package to this list, please verify that it hasn't already been packaged.

In addition, Guix is a distribution that follows the Free System Distribution Guidelines (GNU FSDG) and as such not only it only has free software but these guidelines also have additional requirements (like for instance not steering users toward the installation of nonfree software, no Malware, etc).

So it would be a really good idea to point if the package is already packaged by either a Free GNU/Linux Distribution or a Free Non-GNU Distribution, or at least try to see if that software is fully free software and doesn't have any nonfree dependencies (like nonfree firmwares, libraries, other nonfree packages and so on) or if not indicate if it wasn't checked in order to prevent accidental inclusion of nonfree software in Guix (that could happen for instance if each party assumes that the other people checked while no one checked).

Parabola also has a blacklist repository which contains list of nonfree software found in Arch that Parabola blacklisted and sometimes replaced. It also contains perfectly fine software which is blacklisted for other purposes, like renaming "Arch Linux" in "Parabola" in some packages, but the reason of the blacklist is specified.

This page should be synced with Free software replacements recommended by the FSF.

Packages

Communication

Mail

Multimedia communication

Instant messaging client

briar-gtk
Cryptocat
Delta Chat
Ricochet (+3)
Scli (+1)
The Lounge
Tiny
tkabber
Tox (with clients such as Venom, and MuTox) (+1)
Zulip

Social networking

Aether
Diaspora (+2)
GNU Social (WIP) (+1)
microblog.pub
Pleroma (requires elixir build-system) (+2)
Pump.io (requires nodejs-build-system) (+1)
Whalebird-desktop

Matrix

Production

Editor

Graphics

App Icon Preview
DIGImend
Dynamic Wallpaper Editor
Icon Library
Identity
ImEditor
LDtk
Obfuscate
Ronin
Sweet Home 3D (+2)
Le Biniou
Shutter
OpenTabletDriver
OpenToonz *Note: Already available pre-packaged in Parabola GNU/Linux. So the hard work for this one is already done.*
Natron *Note: On the github releases page, recommended to use precompiled binaries with patches for qt4 and python2 are provided. That one should be used for GNU Guix.*

Office

System

Backup

Snapper (+2)
Timeshift (+1)

Booting

Support booting from pre-existing systemd-boot, i.e. "grub-install --no-nvram".

DEs & WMs

Fonts

-- It would be nice to have the other versions of iosevka.

Hardware

bricxcc
dualsensectl
Jumpdrive
M33-Fio
OctoPrint (patch) (+2)
BambuStudio AGPLv3. An attempt to package for nix can be seen here.
openrazer
OSCAR
Pok3rConf
pok3rtool
qmk_firmware
~~rtl8821cu~~ While the firmware binary has been released under the GPLv2(+?), it lacks corresponding source code. So someone needs to do the work to reconstruct the source code from the binary. See the link in Group:Hardware/research/WiFi/Realtek for more details.
~~rtl88x2bu~~ While the firmware binary has been released under the GPLv2(+?), it lacks corresponding source code. So someone needs to do the work to reconstruct the source code from the binary. See the link in Group:Hardware/research/WiFi/Realtek for more details.
Swapspace (+1)
undervolt
Vial

Input

mozc

Media Transfer Protocol

simple-mtpfs

Shell

Tools

Bleachbit
Bundlewrap wip, Parabola
chntpw
distcc
libguestfs
libsixel
mat2 (+1): wip, Parabola, most probably fully free without nonfree dependencies and FSDG compliant. Some work might still be needed to make sure test passes as we probably want to avoid bugs in software that people might rely on to stay alive.
Pijul Old version available in a community channel pijul.scm
unrar-free
Ventoy
JCryptool

Wayland

X11

Programming

Version control

Programming languages

Ada

Clojure

Leiningen (+1)
babashka

Common Lisp

Eiffel

Emacs

Erlang

Guile

Haskell

stack (build tool)

Java

gradle (+1)
ns-usbloader

Perl

SpamAssassin (written in Perl) (+4)

Python

Scheme

Standard ML

MLton (WIP)

Misc

hamradio

Emulation

Live USB

WoeUSB

Audio

Music

Video

Education

Feed Readers

NewsFlash (+1)

Games

Airshipper
beatoraja
Bouncy Bunny
Cataclysm: Bright Nights
Cemu
Cube 2: Sauerbraten
Deliantra (server + client require special version of perl.)
EasyRPG-Editor (Would require an update to liblcf and prompt an update to easyrpg-player.)
Elona foobar
FreeCol
FreeCS
HamSandwich
iortcw
itch-client (+1)
IVAN
Kye
Liblast
Mesen
Mesen2
Mindustry (requires a gradle-build-system because the build needs a plugin that at least depends on gradle) (+3)
Oolite
OpenArena
OpenNefia
~~Open RuneScape Classic~~ (derived from proprietary Runescape Classic)
OpenSpades
opsu!
osu! (+1)
Panel Attack
Performous
Quaver
Rigs of Rods
Ryujinx
Robust Toolbox
Ryzom (+1)
Shuvit
Sil (WIP needs patches to handle readonly installpath) (+1)
sil-q (can be packaged with Sil)
Soldat
Space Station 14
Stunt Rally
sucle
Terasology
Terrarium (patch)
The Dark Mod (+1)
Tivoli Cloud VR
Tuxemon (patch)
Uebergame
VDrift
Veloren
Vircadi
Warfork
Xye
yuzu-emu

Network

asuka
ELinks (patch)
Falkon
Fragments
Freenet (+1)
fwknop
geth
I2P (+3)
LibreWolf (+1)
matterbridge: Update it and also package in its dependencies in Guix instead of relying on the Go build system to fetch and build them.
metasploit-framework
metasploit-payloads
ncgopher
Pi-hole
profile-sync-daemon
Puppet
Qv2ray
shadowsocks-rust
sqlmap
stig
Syncplay
transgui
transmission-qt
Tribler
Urbit
V2Ray
visurf
Wvdial
wyeb
Yukko
ZeroNet
Vieb Browser
Insomnia

Tor Browser

~~Tor Browser~~ (+11) (has been packaged)

The Tor Browser has an issue that makes it incompatible with the Free System Distribution Guidelines (GNU FSDG): it is configured to use Mozilla the addons repository.

Several strategies are possible to get it in Guix and it might be possible to combine some of them together.

The Tor Browser project might find it very interesting to use Guix instead of Ubuntu for building the Tor Browser as Guix goes way beyond reproducible builds: It has extensive work that has been done to make Guix bootstrapable. Most other distributions only care about reproducible builds and so if the compilers binaries had a backdoor, software built with such compilers could then have a reproducible backdoor.

The issue is that the Tor Browser supports several operating systems (GNU/Linux, Android, Microsoft Windows, MacOS) and currently Guix only supports building software for GNU/Linux, GNU/Hurd and Microsoft Windows (this was contributed by someone wanting to build bitcoin with Guix precisely because extensive work has been made to make Guix bootstrapable).

Adding the ability to build applications for Android should probably be doable but I've no clue at all about MacOS.

In addition Guix already supports i686 and x86_64 for both Windows and GNU/Linux, and we might gain the ability to get the Tor browser for armhf, ARM 64bit (aarch64), powerpc, powerpc64le (the architecture used in the Talos II), riscV64.

And finally Guix pack also support several formats, like tarballs and Debian packages, and more can also be added as well. That would enable the tor-browser to be installed as a regular package. That could be handy with Tails for instance as last time I checked it was just a tarball being extracted.

In any case, it would really be a good idea to make the upstream Tor Browser project switch to Guix for their releases as we would avoid having to do any Q/A to verify that our version of the tor-browser looks exactly the same on the networks and that websites can't distinguish Guix users because it has been patched or built differently. And other FSDG distributions with less strict policies on bootstrapability could either build it though Guix or ship the tor-browser installer as it would then only ship software that is FSDG compliant.

We'd also need to make sure that users don't mess up trying versions that are not exactly the same as the released one (that might happens if the dependencies gets updated in Guix for instance). In any case we could then easily package the tor-browser installer in Guix too.

In addition it could push them to fix or accept fixes for the addon repository problem as Guix is probably not going to accept a tor-browser that is not FSDG compliant.

Now with the addon repository, several approaches could be taken:

It could be removed completely. The Tor Project advise against installing addons anyway as it could de-anonymize users. That's probably the best option here.
It could be moved to another list, for instance the one maintained the GNU project or one maintained by the Tor project.
It could also be fixed at Mozilla but I've no idea how easy it is, especially because we might need to check if the addons are really free software and can be built with free software, etc.

In any case it's probably not super important what option is chosen here as long as it's fixed.

References:

https://labs.parabola.nu/issues/874

Self-hosting

anki-sync-server (+1)
Alps Webmail
EtherCalc (+1)
Etherpad (+1)
Gitlab (+2)
Gitea (+2)
Gogs
Hugo
JMP.chat, which is related to Soprani.ca
Kareha
Matomo
Mediagoblin (+2)
Nextcloud (+4)
Nextcloud-Client (+1)
Sandstorm
sr.ht (+1)
Wakaba
WordPress (patch)
YOURLS

Science

Translator

apertium-tools

Features

Add more cross toolchains for more CPU architectures
- armv4t looks like a good idea as many older ARM boards that boot with free software could then be supported. Debian still officially supports armv4t, so it might be possible to copy their settings and fixes.
- Add an xtensa-elf target as it's probably already supported within packages for building the ath9k_htc firmware
- Find if other firmwares from other architectures are being built
Add more cross toolchains for more OSes
- It would be a good idea to be able to build binaries for Android, we already have a bit of Android components in Guix but they can only be used on GNU/Linux or other already officially supported toolchains or OS. It would be a good idea to add an Android / bionic target. We'd need to check how much bionic is linked to the kernel version being used on the Android device.
Add more Guix pack or guix system image formats
- We could add Arch Linux packages to guix pack be able to be used on Parabola.
- We could enable to ship multiple package in one Debian package (currently that works with the tarball format of guix pack but not with Debian packages)
- Add a way to deploy Guix in a directory in a way compatible with LXC
~~LVM-Support (+5)~~ Guix now has LVM support but it might not be fully complete. I for instance managed to boot a Guix SD system from an ext4 rootfs that is in a LVM partition that is in a LUKS encrypted partition with this guide and by following the official documentation.
Integrate better letsencrypt/certbot. Currently certbot works fine if you already have certificates: it can renew them and so on. But if you use webroot you need the web server to be started for certbot to create or update certificates, but nginx (which is the web server best supported by guixSD API) won't start without the certificates. People deploying services with Guix typically have to do workarounds because of this issue. A solution would be to add a --standalone option for certbot and once the certificate is obtained to trigger the switch to webroot and starting the web server with a hook like it's done when renewing certificates.
Add a better way to deal with secrets or external files: Currently it's up to users to do the provisioning of secrets like VPN credential files. If they package it somehow they end up being in the store and being a security risk as any users could see them. Having to manually provision such files might work in some cases but it doesn't scale well as to do it right we'd need to make a provionning method that works for all the cases (all the different types of images, etc). A solution would be to add some extra option to guix to also include extra files or tarballs. This way the files would be added for all images types (docker, qcow2 system images, disk images, with guix system init, etc).
Add generic ways to generate very small rootfs. For instance there is some support for initramfs already. Now that there is ppc64le support, if we can make images that fit into (128M?) of flash and that OpenBMC is packaged in Guix, it could probably completely support RYF computers like the Talos II. If we have a good enough abstraction like a target OS for instance, we could probably add the software we want in initramfs and/or in the BMC and configure them like a regular Guix system from the host computer. There is already support for managing VMs through a ganetti API in guix and there are also childhurds in Guix.
Cross distributions bootstrap
- Enable to install Parabola and Hyperbola from Guix. Status: wip. I've got some failures with pacstrap on GuixSD because the PATH is not the same than Parabola's path. I don't know where Parabola's PATH comes from though as /etc/environment is empty by default. Note that some packages need to be refreshed to work as Parabola and/or Hyperbola don't keep many older packages and sources. But once all that lands in Guix it shound't be an issue anymore as the source should be made available though software heritage, and guix will fallback to it.
- Package Guix in Parabola. Currently Guix package only worked on x86_64, so I added a guix-installer package to make sure we could still install it in a safe way (where we have some chain of trust with gpg during the installation).

Documentation

Documentation Wishlist

Other

There are many bugs and patches on https://issues.guix.gnu.org/, so if you want to help it might be a good idea to try to fix bugs, review patches and so on.

TODO

When libreplanet.org is upgraded to a new version of MediaWiki, use interwiki links to link to the Free Software Directory for descriptions of wishlisted software.

Sandboxes (in containers/VMs/Websites) where you can play around and learn about
- administrative package operations (remove, install, upgrade)
- packaging software (like the debian packaging tutorials)
- learning the in and outs of the language which is used for packaging
- how to package software which has dependencies in some language-specific artefactories (pip, crates, maven and so on), especially if you want to one-shot them, so you have them and do it properly later.

This page was a featured resource in February 2019.

@@ Line 23: / Line 23: @@
 ==== Mail ====
-* [https://aerc-mail.org/ aerc] (+1)
 * [https://directory.fsf.org/wiki/Courier Courier MTA with SQWebMail] (+1)
-* [https://directory.fsf.org/wiki/Postfix Postfix] (+3)
+* [https://www.nongnu.org/nmh/ nmh]
+* [https://directory.fsf.org/wiki/Postfix Postfix] (+4)
+* [https://repo.or.cz/s-mailx.git S-nail/S-mailx]
 * [https://directory.fsf.org/wiki/Usermin Usermin]
@@ Line 31: / Line 32: @@
 * [https://directory.fsf.org/wiki/Ekiga Ekiga] (+3)
 * [https://directory.fsf.org/wiki/Empathy Empathy] (+3)
-* [https://directory.fsf.org/wiki/Collection:GNU/Linux Jitsi Desktop] (+4)
+* [https://directory.fsf.org/wiki/Collection:GNU/Linux Jitsi Desktop] (+5)
 * [https://directory.fsf.org/wiki/Collection:GNU/Linux KDE Telepathy]
-* [https://github.com/signalapp/Signal-Desktop Signal Desktop] (+3)
+* [https://github.com/signalapp/Signal-Desktop Signal Desktop] (+4)
 ==== Instant messaging client ====
 * [https://code.briarproject.org/briar/briar-gtk briar-gtk]
-* [https://git.causal.agency/catgirl/ catgirl]
 * [https://directory.fsf.org/wiki/Cryptocat Cryptocat]
 * [https://github.com/deltachat/deltachat-desktop Delta Chat]
 * [https://directory.fsf.org/wiki/Ricochet Ricochet] (+3)
 * [https://github.com/isamert/scli Scli] (+1)
+* [https://github.com/thelounge/thelounge The Lounge]
 * [https://github.com/osa1/tiny Tiny]
 * [https://chiselapp.com/user/sgolovan/repository/tkabber/index tkabber]
@@ Line 60: / Line 61: @@
 * [https://github.com/kamax-matrix/mxisd mxisd] (+1)
 * [https://invent.kde.org/network/neochat NeoChat]
-* [https://github.com/poljar/weechat-matrix weechat-matrix] (+2)
 === Production ===
 ==== Editor ====
-* [https://directory.fsf.org/wiki/Arduino arduino IDE] (+3)
+* [https://directory.fsf.org/wiki/Arduino arduino IDE] (+4)
+* [https://github.com/helix-editor/helix Helix]
 * [https://directory.fsf.org/wiki/Light_Table Light Table]
 * [https://github.com/Kethku/neovide Neovide]
@@ Line 71: / Line 72: @@
 * [https://platformio.org/ PlatformIO]
 * [https://gitlab.gnome.org/World/Tau/ Tau]
-* [https://gitlab.gnome.org/chergert/gnome-text-editor Text Editor]
+* [http://ex-vi.sourceforge.net Traditional Vi]
-* [https://vscodium.com/ VSCodium] (+1)
+* [https://vscodium.com/ VSCodium] (+3)
+* [https://github.com/xi-editor/xi-editor xi-editor]
 ==== Graphics ====
 * [https://gitlab.gnome.org/World/design/app-icon-preview App Icon Preview]
+* [http://digimend.github.io/ DIGImend]
 * [https://github.com/maoschanz/dynamic-wallpaper-editor Dynamic Wallpaper Editor]
 * [https://gitlab.gnome.org/World/design/icon-library Icon Library]
@@ Line 85: / Line 88: @@
 * [https://directory.fsf.org/wiki/Sweet_Home_3D Sweet Home 3D] (+2)
 * [https://gitlab.com/lebiniou/lebiniou Le Biniou]
+* [https://github.com/shutter-project/shutter Shutter]
+* [https://github.com/OpenTabletDriver/OpenTabletDriver OpenTabletDriver]
+* [https://github.com/opentoonz/opentoonz OpenToonz] *Note: Already available pre-packaged in Parabola GNU/Linux. So the hard work for this one is already done.*
+* [https://github.com/NatronGitHub/Natron Natron] *Note: On the github releases page, recommended to use precompiled binaries with patches for qt4 and python2 are provided. That one should be used for GNU Guix.*
 ==== Office ====
 * [https://www.zotero.org/download/ Zotero Desktop] (+4)
 * [https://koreader.rocks/ KOReader] (+2)
+* [https://github.com/phase1geo/minder/ Minder]
+* [https://www.projectlibre.com/ ProjectLibre]
 === System ===
 * [https://github.com/costales/gufw Gufw] (+1)
+* [https://firewalld.org/ firewalld]
+* [https://buildah.io/ buildah]
 ==== Backup ====
-* [http://snapper.io/ Snapper] (+1)
+* [http://snapper.io/ Snapper] (+2)
+* [https://github.com/linuxmint/timeshift Timeshift] (+1)
 ==== Booting ====
@@ Line 110: / Line 122: @@
 * [https://wio-project.org/ wio]
 * [https://github.com/svenstaro/wmfocus wmfocus]
+* [https://hyprland.org/ Hyprland]
 ==== Fonts ====
@@ Line 115: / Line 128: @@
 * [https://github.com/wikkyk/leggie Leggie]
 * [https://github.com/phallus/fonts Lemon]
-* [https://github.com/RedHatBrand/Overpass Overpass]
 * [http://tobiasjung.name/profont/ ProFont] (+1)
 * [https://proggyfonts.net/ Proggy]
@@ Line 122: / Line 134: @@
 * [https://github.com/curioustorvald/Terrarum-sans-bitmap Terrarum Sans Bitmap]
 * [https://github.com/Lucy/tewi-font Tewi]
+* [https://github.com/be5invis/iosevka Iosevka Other Styles ]
+-- It would be nice to have the other versions of iosevka.
 ==== Hardware ====
 * [http://bricxcc.sourceforge.net/ bricxcc]
-* [https://github.com/ckb-next/ckb-next ckb-next]
+* [https://github.com/thinkingbits/dualsensectl dualsensectl]
-* [https://github.com/linuxhw/hw-probe hw-probe]
 * [https://github.com/dreemurrs-embedded/Jumpdrive/ Jumpdrive]
 * [https://github.com/donovan6000/M33-Fio M33-Fio]
-* [https://github.com/OctoPrint/OctoPrint OctoPrint] (+2)
+* [https://github.com/OctoPrint/OctoPrint OctoPrint] ([https://issues.guix.gnu.org/51314 patch]) (+2)
+* [https://github.com/bambulab/BambuStudio BambuStudio] AGPLv3. An attempt to package for nix can be seen [https://github.com/zhaofengli/nixpkgs/blob/bambu-studio/pkgs/applications/misc/bambu-studio/default.nix here].
 * [https://github.com/openrazer/openrazer openrazer]
 * [https://gitlab.com/pholy/OSCAR-code OSCAR]
@@ Line 165: / Line 179: @@
 * [https://github.com/ciromattia/kcc kcc]
 * [https://github.com/hackerb9/lsix lsix]
+* [https://github.com/ssut/payload-dumper-go payload-dumper-go]
 * [https://gitlab.com/postmarketOS/pmbootstrap pmbootstrap]
 * [https://github.com/mathaou/termdbms termdbms]
@@ Line 172: / Line 187: @@
 * [https://github.com/Yuubi-san/unaesgcm unaesgcm]
 * [https://github.com/sigpipe/urlview urlview]
-* [https://github.com/ReimuNotMoe/ydotool ydotool]
 ==== Tools ====
+* [https://github.com/bleachbit/bleachbit Bleachbit]
 * Bundlewrap [https://framagit.org/GNUtoo/machines_configs/-/raw/guix/guix.scm/gnu/packages/bundlewrap.scm wip], [https://www.parabola.nu/packages/community/pcr/bundlewrap/ Parabola]
+* [http://pogostick.net/~pnh/ntpasswd/ chntpw]
 * [https://distcc.github.io/ distcc]
 * [http://libguestfs.org/ libguestfs]
 * [https://github.com/saitoha/libsixel libsixel]
-* mat2: [https://framagit.org/GNUtoo/machines_configs/-/raw/guix/guix.scm/gnu/packages/mat2.scm wip], [https://www.parabola.nu/packages/community/x86_64/mat2/ Parabola], most probably fully free without nonfree dependencies and FSDG compliant. Some work might still be needed to make sure test passes as we probably want to avoid bugs in software that people might rely on to stay alive.
+* mat2 (+1): [https://framagit.org/GNUtoo/machines_configs/-/raw/guix/guix.scm/gnu/packages/mat2.scm wip], [https://www.parabola.nu/packages/community/x86_64/mat2/ Parabola], most probably fully free without nonfree dependencies and FSDG compliant. Some work might still be needed to make sure test passes as we probably want to avoid bugs in software that people might rely on to stay alive.
+* [https://pijul.org/ Pijul] Old version available in a community channel [https://github.com/Hellseher/guix-channel-1/blob/master/pijul.scm pijul.scm]
+* [https://gitlab.com/bgermann/unrar-free unrar-free]
 * [https://www.ventoy.net/en/index.html Ventoy]
+* [https://github.com/jcryptool JCryptool]
 ==== Wayland ====
@@ Line 186: / Line 205: @@
 * [https://github.com/nyyManni/dmenu-wayland dmenu-wayland] (+1)
 * [https://github.com/giucam/termistor termistor]
-* [https://github.com/brunelli/wl-clipboard-x11 wl-clipboard-x11] (+1)
 * [https://git.sr.ht/~sircmpwn/wshowkeys wshowkeys]
@@ Line 194: / Line 212: @@
 * [http://gambas.sourceforge.net/en/main.html Gambas]
 * [https://github.com/Bionus/imgbrd-grabber imgbrd-grabber]
-* [https://github.com/tsujan/Kvantum/tree/master/Kvantum Kvantum] (+1)
+* [https://github.com/marcusbritanicus/NewBreeze NewBreeze]
 * [https://github.com/fernandotcl/pa-applet PulseAudio-Applet]
-* [https://github.com/phillipberndt/pqiv pqiv]
 * [https://github.com/FedoraQt/QGnomePlatform QGnomePlatform]
 * [https://github.com/qt/qtstyleplugins qtstyleplugins]
@@ Line 204: / Line 221: @@
 === Programming ===
+* [https://deno.land/ Deno]
 * [https://sourceforge.net/p/libdwarf/code/ci/master/tree/ libdwarf]
@@ Line 214: / Line 232: @@
 * [https://github.com/makuto/cakelisp/ Cakelisp]
 * [https://crystal-lang.org Crystal]
-* [https://github.com/bakpakin/Fennel Fennel]
 * [https://isabelle.in.tum.de isabelle] (+1)
 * [https://directory.fsf.org/wiki/Klisp klisp]
 * [https://directory.fsf.org/wiki/Scala Scala]
-* [https://ziglang.org zig] (+2)
+* <s>[https://github.com/AlbanBedel/scummc ScummC]</s>[https://issues.guix.gnu.org/64787 (has been packaged)]
+===== Ada =====
+* [https://www.gnu.org/software/gnat/ GNU Ada] (+1)
+* [https://github.com/AdaCore/gps GNAT Studio]
+* [https://github.com/AdaCore/gprbuild GPRbuild]
+* [https://github.com/AdaCore/spark2014 SPARK2014]
 ===== Clojure =====
-* [https://leiningen.org/ Leiningen]
+* [https://leiningen.org/ Leiningen] (+1)
+* [https://babashka.org/ babashka]
+===== Common Lisp =====
+* [https://cmucl.org CMUCL]
+* [https://github.com/roswell/roswell Roswell]
+* [https://www.quicklisp.org Quicklisp]
+===== Eiffel =====
+* [https://savannah.gnu.org/projects/liberty-eiffel/ GNU Eiffel Compiler]
+* [https://github.com/EiffelSoftware/EiffelStudio Eiffel Studio]
 ===== Emacs =====
@@ Line 227: / Line 260: @@
 * [https://github.com/NicolasPetton/Indium indium]
 * [https://github.com/NicolasPetton/xref-js2 xref-js2]
+===== Erlang =====
 ===== Guile =====
 ===== Haskell =====
-*[https://www.haskellstack.org/ stack] (build tool)
+* [https://www.haskellstack.org/ stack] (build tool)
 ===== Java =====
@@ Line 241: / Line 276: @@
 ===== Python =====
+* [https://buildbot.net Buildbot]
 * [https://github.com/hydrusnetwork/hydrus hydrus]
 * [https://directory.fsf.org/wiki/PyPump PyPump]
+* [https://trimage.org/ Trimage]
-===== Eiffel =====
+===== Scheme =====
-* [https://savannah.gnu.org/projects/liberty-eiffel/ GNU Eiffel Compiler]
+* [https://github.com/justinethier/cyclone Cyclone Scheme]
-* [https://github.com/EiffelSoftware/EiffelStudio Eiffel Studio]
+* [http://www.larcenists.org Larceny]
-===== Ada =====
+===== Standard ML =====
-* [https://www.gnu.org/software/gnat/ GNU Ada]
+* [https://github.com/MLton/mlton MLton] ([https://issues.guix.gnu.org/38605 WIP])
-* [https://github.com/AdaCore/gps GNAT Studio]
-* [https://github.com/AdaCore/gprbuild GPRbuild]
-* [https://github.com/AdaCore/spark2014 SPARK2014]
 === Misc ===
+* [https://github.com/lesserkuma/FlashGBX FlashGBX]
+* [https://github.com/gollum/gollum Gollum]
 * [https://github.com/tristanheaven/gtkhash Gtkhash]
-* [https://github.com/FiloSottile/age Age]
+* [https://github.com/str4d/rage Rage] (+1)
-* [https://github.com/str4d/rage Rage]
-* [https://github.com/bleachbit/bleachbit Bleachbit]
 * [https://github.com/gephi/gephi Gephi]
 * [https://gitlab.gnome.org/Cogitri/Health Health]
@@ Line 264: / Line 298: @@
 * [https://gitlab.com/rmnvgr/metadata-cleaner Metadata Cleaner]
 * [https://gitlab.gnome.org/gnumdk/passbook Passbook]
+* [https://github.com/trustcrypto/OnlyKey-App OnlyKey App]
+* [https://github.com/cbrnix/Newaita Newaita Icons]
+* [https://www.gpxsee.org/ GPXSee]
+* [https://yacy.de/ YacY]
+* [https://git.sr.ht/~martijnbraam/lsplug lsplug]
+==== hamradio ====
+* [https://github.com/myzinsky/CloudLogCatQt  CloudLogCatQt]
+* [http://github.com/gqrx-sdr/gqrx gqrx]
@@ Line 271: / Line 314: @@
 * [https://github.com/PCSX2/pcsx2 PCSX2] (+1)
 * [https://rpcs3.net/ RPCS3]
+* [https://www.zsnes.com/ zsnes]
 ==== Live USB ====
@@ Line 277: / Line 321: @@
 ==== Audio ====
 * [https://github.com/diamondburned/aqours aqours]
+* [https://kcat.tomasu.net/alure.html ALURE]
 * [https://github.com/falkTX/Cadence Cadence]
-* [https://directory.fsf.org/wiki/Mixxx Mixxx] (+1)
 * [https://github.com/MycroftAI MycroftAI]
 * [https://github.com/fulhax/ncpamixer ncpamixer]
 * [https://gitlab.gnome.org/GNOME/gnome-sound-recorder Sound Recorder]
+* [https://github.com/stargateaudio/stargate Stargate]
 * [https://github.com/boysetsfrog/vimpc vimpc]
 * [https://github.com/whipper-team/whipper whipper]
@@ Line 289: / Line 334: @@
 * [https://www.npmjs.com/package/abc2svg abc2svg]
 * [https://github.com/leesavide/abcm2ps abcm2ps]
-* [https://ccrma.stanford.edu/software/cmn/ cmn]
 * [https://github.com/grame-cncm/guidolib guidolib]
 * [https://github.com/mdedwards/slippery-chicken slippery-chicken]
+* [https://github.com/marin-m/SongRec SongRec]
+* [https://github.com/sonic-pi-net/sonic-pi Sonic Pi]
 ==== Video ====
@@ Line 298: / Line 344: @@
 * [https://github.com/mifi/lossless-cut LosslessCut]
 * [https://directory.fsf.org/wiki/MythTV MythTV]
-* [https://github.com/trizen/pipe-viewer pipe-viewer]
 * [https://gitlab.shinice.net/artectrex/Cuttlefish Cuttlefish]
 * [https://gitlab.gnome.org/YaLTeR/video-trimmer Video Trimmer]
+* [https://github.com/FreeTubeApp/FreeTube FreeTube] (+1)
 ==== Education ====
 * [https://directory.fsf.org/wiki/Dr._geo Dr. Geo]
 * [https://directory.fsf.org/wiki/Glean Glean]
+* [http://spimsimulator.sourceforge.net SPIM MIPS Simulator]
 ==== Feed Readers ====
 * [https://gitlab.com/news-flash/news_flash_gtk NewsFlash] (+1)
-* [https://gitlab.gnome.org/World/gfeeds Feeds]
 ==== Games ====
@@ Line 315: / Line 361: @@
 * Bouncy Bunny
 * [https://github.com/cataclysmbnteam/Cataclysm-BN Cataclysm: Bright Nights]
+* [https://github.com/cemu-project/Cemu Cemu]
 * [https://directory.fsf.org/wiki/Cube2 Cube 2: Sauerbraten]
+* [https://http://www.deliantra.net/ Deliantra] (server + client require special version of perl.)
+* [https://github.com/EasyRPG/Editor EasyRPG-Editor] (Would require an update to liblcf and prompt an update to easyrpg-player.)
 * [https://github.com/elonafoobar/elonafoobar Elona foobar]
 * [https://directory.fsf.org/wiki/FreeCol FreeCol]
 * [https://sourceforge.net/projects/freecs-1-5/ FreeCS]
 * [https://github.com/SpaceManiac/HamSandwich HamSandwich]
+* [https://github.com/iortcw/iortcw/ iortcw]
+* [https://github.com/itchio/itch itch-client] (+1)
 * [https://github.com/Attnam/ivan IVAN]
 * [http://games.moria.org.uk/kye/ Kye]
 * [https://git.gieszer.link/unfa/liblast Liblast]
-* [https://www.gnu.org/software/liquidwar6/ Liquid War 6]
+* [https://github.com/SourMesen/Mesen Mesen]
-* [https://github.com/Anuken/Mindustry Mindustry] (requires a gradle-build-system because the build needs a plugin that at least depends on gradle) (+2)
+* [https://github.com/SourMesen/Mesen2 Mesen2]
+* [https://github.com/Anuken/Mindustry Mindustry] (requires a gradle-build-system because the build needs a plugin that at least depends on gradle) (+3)
 * [https://directory.fsf.org/wiki/Oolite Oolite]
 * [https://directory.fsf.org/wiki/OpenArena OpenArena]
 * [https://github.com/Ruin0x11/OpenNefia OpenNefia]
-* [https://orsc.dev/open-rsc/Game Open RSC]
+* <s>Open RuneScape Classic</s> (derived from proprietary Runescape Classic)
 * [https://openspades.yvt.jp/ OpenSpades]
+* [https://github.com/itdelatrisu/opsu opsu!]
 * [https://github.com/ppy/osu osu!] (+1)
+* [https://github.com/panel-attack/panel-attack Panel Attack]
+* [https://github.com/performous/performous Performous]
 * [https://github.com/Quaver/Quaver Quaver]
 * [https://github.com/RigsOfRods/rigs-of-rods Rigs of Rods]
+* [https://github.com/Ryujinx/Ryujinx Ryujinx]
 * [https://github.com/space-wizards/RobustToolbox Robust Toolbox]
-* [https://ryzom.com/ Ryzom]
+* [https://ryzom.com/ Ryzom] (+1)
 * [http://gogs.shuvit.org:3000/Shuvit-Org/shuvit Shuvit]
 * [http://www.amirrorclear.net/flowers/game/sil Sil] ([https://hidamari.blue/git/packages/html/sil.scm.html WIP] needs patches to handle readonly installpath) (+1)
@@ Line 343: / Line 399: @@
 * [https://github.com/gregcman/sucle sucle]
 * [https://directory.fsf.org/wiki/Terasology Terasology]
-* [https://gitlab.com/hydren/terrarium Terrarium]
+* [https://gitlab.com/hydren/terrarium Terrarium] ([https://issues.guix.gnu.org/62178 patch])
 * [https://www.thedarkmod.com/main/ The Dark Mod] (+1)
 * [https://tivolicloud.com/ Tivoli Cloud VR]
-* [https://github.com/Tuxemon/Tuxemon Tuxemon]
+* [https://github.com/Tuxemon/Tuxemon Tuxemon] ([https://issues.guix.gnu.org/67131 patch])
 * [https://github.com/Duion/Uebergame Uebergame]
 * [https://directory.fsf.org/wiki/VDrift VDrift]
@@ Line 357: / Line 413: @@
 ==== Network ====
 * [https://git.sr.ht/~julienxx/asuka asuka]
-* [https://github.com/debauchee/barrier barrier]
+* [https://directory.fsf.org/wiki/ELinks ELinks] ([https://issues.guix.gnu.org/72572 patch])
-* [https://directory.fsf.org/wiki/ELinks ELinks]
-* [https://www.fail2ban.org/ fail2ban] (+3)
 * [https://cgit.kde.org/falkon.git Falkon]
 * [https://gitlab.gnome.org/World/Fragments Fragments]
 * [https://directory.fsf.org/wiki/Freenet Freenet] (+1)
+* [https://github.com/mrash/fwknop fwknop]
 * [https://github.com/ethereum/go-ethereum geth]
-* [https://directory.fsf.org/wiki/I2P I2P] (+2)
+* [https://directory.fsf.org/wiki/I2P I2P] (+3)
-* [https://librewolf-community.gitlab.io LibreWolf]
+* [https://librewolf-community.gitlab.io LibreWolf] (+1)
 * [https://guix.gnu.org/en/packages/matterbridge-1.22.2/ matterbridge]: Update it and also package in its dependencies in Guix instead of relying on the Go build system to fetch and build them.
 * [https://github.com/rapid7/metasploit-framework metasploit-framework]
@@ Line 371: / Line 426: @@
 * [https://github.com/jansc/ncgopher ncgopher]
 * [https://pi-hole.net/ Pi-hole]
+* [https://github.com/graysky2/profile-sync-daemon profile-sync-daemon]
 * [https://github.com/puppetlabs/puppet Puppet]
 * [https://github.com/Qv2ray/Qv2ray Qv2ray]
-* [https://gitlab.com/Remmina/Remmina Remmina]
 * [https://github.com/shadowsocks/shadowsocks-rust shadowsocks-rust]
 * [http://sqlmap.org sqlmap]
@@ Line 383: / Line 438: @@
 * [https://github.com/urbit/urbit Urbit]
 * [https://github.com/v2fly/v2ray-core V2Ray]
+* [https://sr.ht/~sircmpwn/visurf/ visurf]
 * [https://github.com/wlach/wvdial Wvdial]
+* [https://github.com/jun7/wyeb wyeb]
 * [https://github.com/faissaloo/Yukko Yukko]
 * [https://zeronet.io/ ZeroNet]
+* [https://github.com/Jelmerro/Vieb Vieb Browser]
+* [https://github.com/Kong/insomnia Insomnia]
 ==== Tor Browser ====
-* [https://directory.fsf.org/wiki/Tor_Browser Tor Browser] (+10)
+* <s>[https://directory.fsf.org/wiki/Tor_Browser Tor Browser]</s> (+11) ([https://issues.guix.gnu.org/42380 has been packaged])
 The Tor Browser has an issue that makes it incompatible with the Free System Distribution Guidelines (GNU FSDG): it is configured to use Mozilla the addons repository.
@@ Line 438: / Line 497: @@
 * [https://directory.fsf.org/wiki/Sr.ht sr.ht] (+1)
 * [http://wakaba.c3.cx/s/web/wakaba_kareha Wakaba]
+* [https://wordpress.org WordPress] ([https://issues.guix.gnu.org/35634 patch])
 * [https://github.com/YOURLS/YOURLS YOURLS]
 ==== Science ====
-* [https://directory.fsf.org/wiki/Logisim Logisim]
+* [https://directory.fsf.org/wiki/Logisim Logisim] (+1)
-* [https://directory.fsf.org/wiki/Sage Sage] (+2)
+* [https://github.com/openrocket/openrocket OpenRocket]
+* [https://directory.fsf.org/wiki/Sage Sage] (+3)
 * [https://directory.fsf.org/wiki/Scilab Scilab]
+* [https://www.cs.waikato.ac.nz/ml/weka/index.html Weka]
+* [https://sourceforge.net/projects/xflr5/ XFLR5]
 ==== Translator ====
@@ Line 449: / Line 512: @@
 == Features ==
-* Add more cross toolcains for more CPU architectures
+* Add more cross toolchains for more CPU architectures
 ** armv4t looks like a good idea as many older ARM boards that boot with free software could then be supported. Debian still officially supports armv4t, so it might be possible to copy their settings and fixes.
 ** Add an xtensa-elf target as it's probably already supported within packages for building the ath9k_htc firmware
@@ Line 464: / Line 527: @@
 * Add generic ways to generate very small rootfs. For instance there is some support for initramfs already. Now that there is ppc64le support, if we can make images that fit into (128M?) of flash and that OpenBMC is packaged in Guix, it could probably completely support RYF computers like the Talos II. If we have a good enough abstraction like a target OS for instance, we could probably add the software we want in initramfs and/or in the BMC and configure them like a regular Guix system from the host computer. There is already support for managing VMs through a ganetti API in guix and there are also childhurds in Guix.
 * Cross distributions bootstrap
-** Enable to install Parabola and Hyperbola from Guix. Status: [https://framagit.org/GNUtoo/machines_configs/-/raw/guix/guix.scm/gnu/packages/archlinux.scm wip]. I've got some failures with pacstrap on GuixSD because the PATH is not the same than Parabola's path. I don't know where Parabola's PATH comes from though as /etc/environment is empty by default.
+** Enable to install Parabola and Hyperbola from Guix. Status: [https://framagit.org/GNUtoo/machines_configs/-/raw/guix/guix.scm/gnu/packages/archlinux.scm wip]. I've got some failures with pacstrap on GuixSD because the PATH is not the same than Parabola's path. I don't know where Parabola's PATH comes from though as /etc/environment is empty by default. Note that some packages need to be refreshed to work as Parabola and/or Hyperbola don't keep many older packages and sources. But once all that lands in Guix it shound't be an issue anymore as the source should be made available though software heritage, and guix will fallback to it.
 ** Package Guix in Parabola. Currently Guix package only worked on x86_64, so I added a guix-installer package to make sure we could still install it in a safe way (where we have some chain of trust with gpg during the installation).
+== Documentation ==
+[[Documentation Wishlist]]
 == Other ==
@@ Line 473: / Line 539: @@
 * When libreplanet.org is upgraded to a new version of MediaWiki, use interwiki links to link to the Free Software Directory for descriptions of wishlisted software.
+* Sandboxes (in containers/VMs/Websites) where you can play around and learn about
+** administrative package operations (remove, install, upgrade)
+** packaging software (like the debian packaging tutorials)
+** learning the in and outs of the language which is used for packaging
+** how to package software which has dependencies in some language-specific artefactories (pip, crates, maven and so on), especially if you want to one-shot them, so you have them and do it properly later.
 {{featured resource|month=February|year=2019}}